圧力容器の高温設計に対する材料強度基準値の調査,研究 第2報 材料基準値データベースの調査

DOI

書誌事項

タイトル別名
  • Interim Report of Mechanical Properties for Elevated Temperature Design of Pressure Vessels. Part 2. Survey of Data Base for Elevated Temperature Material Properties.
  • Survey of Data Base for Elevated Temperature Material Properties
  • 材料基準値データベースの調査

抄録

The Sub-commitee on Mechanical Properties of the JPVRC-Elevated Temperature Design Committee (J-ETD) surveyed several material data bases on typical high temperature resistant steels to contribute to future establishment of the material strength codes or standards, which will be utilized under the simplified procedures for design and structural serviceability assessment for non-nuclear pressure vessels. Several accessible data bases, issued by public institutes, research councils and committees etc., are already available or will be available in the near future. But those data bases are not necessarily sufficient to establish the material strength codes or standards by themselves. Consolidation of several data bases and further acquisition of insufficient data, especially on creep deformation and creep-fatigue properties into the data bases, are required to prepare for establishment of the material strength codes and standards. Data bases on weldment properties will be also needed.

収録刊行物

  • 圧力技術

    圧力技術 33 (4), 190-196, 1995

    一般社団法人 日本高圧力技術協会

詳細情報 詳細情報について

  • CRID
    1390001204618163328
  • NII論文ID
    130004259732
  • DOI
    10.11181/hpi1972.33.190
  • ISSN
    13479598
    03870154
  • 本文言語コード
    ja
  • データソース種別
    • JaLC
    • CiNii Articles
  • 抄録ライセンスフラグ
    使用不可

問題の指摘

ページトップへ