書誌事項
- タイトル別名
-
- Wave Front Correction Characteristic of Adaptive Optics System Available in Vacuum and High Temperature Environments.
抄録
We have developed a wave front correction system for use in vacuum and high temperature environments. The sensor is a Shack-Hartman type composed of afocal system and 10×14 micro lens array designed athermaly, and a commercial CCD camera. The measurement error of the wave front was less than 1/10λ rms in atemperature range from 20°C to 60°C in a vacuum environment. The deformable mirror is composed of an 84×84 mm mirror, 5×5 PZT actuators, and hinges connected by a bonds designed for use in high temperatureand vacuum environments. The wave front acurracy was 1/10λ rms in the region of ±5λ and the 3rd ordermode in a vaccum of -1.3×10-4 Pa and a temperature of range from 26°C to 60°C. The control band of the system was 1 Hz. The characteristics of this system were measured and evaluated by using a 200 W level dyelaser beam of 35×50 mm, and wave front warps of about 4λ p-v were corrected to 0.1λ p-v within a time of 1 sec.
収録刊行物
-
- レーザー研究
-
レーザー研究 27 (2), 104-109, 1999
一般社団法人 レーザー学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001204646160896
-
- NII論文ID
- 130003702642
-
- ISSN
- 13496603
- 03870200
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可