演算子インピーダンスの周波数特性を利用した同期機の等価回路定数算出法とブラシレス機への適用

  • 田中 晃
    東洋大学大学院 理工学研究科 電気電子情報専攻
  • 山本 修
    職業能力開発総合大学校
  • 荒 隆裕
    関東職業能力開発大学校
  • 堺 和人
    東洋大学大学院 理工学研究科 電気電子情報専攻
  • 小室 修二
    東洋大学大学院 理工学研究科 電気電子情報専攻

書誌事項

タイトル別名
  • Equivalent Circuit Constants of Synchronous Machine Using Frequency Characteristics of Operational Impedances and Application to Brushless-Excited Machine
  • エンザンシ インピーダンス ノ シュウハスウ トクセイ オ リヨウ シタ ドウキキ ノ トウカ カイロ テイスウ サンシュツホウ ト ブラシレスキ エ ノ テキヨウ

この論文をさがす

説明

This study proposes a method for determining the equivalent circuit constants of synchronous machines. First, a new approach to calculate the equivalent circuit constants considering mutual leakage reactance between field and damper windings is proposed. This method can determine the constants by substituting synchronous machine constants (time constants and reactances) in simple formulae. As these machine constants are easily obtained from the frequency characteristics of the d-axis and q-axis operational impedances measured through the standstill DC test, determining the equivalent circuit constants is considerably simplified. Second, an improved DC test that can measure the operational impedances of a synchronous machine with a brushless excitation system is proposed. This method allows for performing the DC test without separating the diode rectifier circuit from the field winding of a rotor. As a practical example, the proposed method is implemented on a 10-kW salient-pole synchronous generator with an external diode bridge rectifier connected to field winding terminals. Using the determined equivalent circuit constants, the field and armature transient currents at a sudden three-phase short circuit are simulated. By comparing the simulation results with measurement test data, the validity of the proposed method is verified.

収録刊行物

参考文献 (10)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ