書誌事項
- タイトル別名
-
- Influence of Arc Discharge on the Surface of a Contact Wire
- カイリジ アーク ホウデン ガ トロリセン ヒョウメン ニ オヨボス エイキョウ
この論文をさがす
説明
Arc discharges increase the mass of the anode in a contact field. However, contact losses decrease the mass of the cathode, which is made of current-collecting materials in a rail field. Conducting careful experiments with the focus on proper changes in arc duration make it possible to notice clear differences among the volumes of the molten material, the surface concave of contact wire on the anode, and the molten-metal bridge. The authors analyzed the differences because the mechanism in the rail field is not the same as that in the contact field but the mechanism is related to the material decrease in the rail field. The Phenomena observed between the anode and the cathode from the start to approximately 10ms during the arc duration can be clarified by taking the aforementioned differences into account. Understanding the phenomena makes it possible to explain the decrease in the current-collecting materials. The paper presents the concave measurement results of the contact wire and the phenomena observed between the electrodes from the start to approximately 10ms during the arc duration.
収録刊行物
-
- 電気学会論文誌D(産業応用部門誌)
-
電気学会論文誌D(産業応用部門誌) 135 (4), 327-334, 2015
一般社団法人 電気学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001204659084416
-
- NII論文ID
- 130005062303
-
- NII書誌ID
- AN10012320
-
- ISSN
- 13488163
- 09136339
-
- NDL書誌ID
- 026346726
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可