Considerations on Thrust-to-Input Ratio of a Cylindrical Moving Coil Type Linear DC Motor
-
- Mizuno Tsutomu
- Shinshu University
-
- Miyashita Toshihito
- Sanyo Denki
-
- Yajima Hisashi
- Shinshu University
-
- Tang Yu Qi
- Shinshu University
-
- Yamamoto Hideo
- Matsushita Refrigeration
-
- Shibuya Koyo
- Matsushita Refrigeration
-
- Yamada Hajime
- Shinshu University
Bibliographic Information
- Other Title
-
- 円筒状コイル可動形リニア直流モータの推力/入力比に関する考察
- エントウジョウ コイル カドウガタ リニア チョクリュウ モータ ノ スイリョ
Search this article
Abstract
Linear DC motors (LDMs) are widely used for servo-actuator, compressor and so on. High-efficiency LDMs are strongly desired for compressors. To realize the LDMs with high-efficiency characteristics, decreasing the copper losses, namely, thrust-to-input ratio, F/P, must be increased. This paper describes an optimization method for the F/P of a moving coil type LDM. The following results are obtained:<br>(1) Simplified expression for the F/P of the LDM is derived from the permeance analysis method. The effects that dimensions of the LDM influence the F/P of the LDM are investigated through the simplified expression for the F/P. As a result, the optimum dimension of the LDM for maximizing the F/P exists.<br>(2) When the static thrust is 100 N, the measured F/P of the initial LDM is 7.9 N/W, and the errors by using the simplified expression for the F/P and the finite element method (FEM) are 33% and 8%, respectively. Derived simplified expression for the F/P is useful because the F/P can be calculated easily.<br>(3) An improved LDM, which has 26% higher F/P than those of the initial LDM, is designed by using the permeance analysis method and the FEM.
Journal
-
- IEEJ Transactions on Industry Applications
-
IEEJ Transactions on Industry Applications 118 (4), 444-449, 1998
The Institute of Electrical Engineers of Japan
- Tweet
Keywords
Details 詳細情報について
-
- CRID
- 1390001204659912832
-
- NII Article ID
- 10002878220
- 10007984271
-
- NII Book ID
- AN10012320
-
- ISSN
- 13488163
- 09136339
-
- NDL BIB ID
- 4436406
-
- Data Source
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- Abstract License Flag
- Disallowed