冷媒の微細流路内垂直下降気液二相流の圧力損失

  • 宮田 一司
    九州大学大学院工学府機械科学専攻 日本学術振興会特別研究員DC
  • 榎木 光治
    九州大学大学院工学府機械科学専攻
  • 森 英夫
    九州大学大学院工学研究院機械工学部門
  • 濱本 芳徳
    九州大学大学院工学研究院機械工学部門

書誌事項

タイトル別名
  • Two-Phase Pressure Drop of a Refrigerant Flowing Vertically Downward in a Mini-channel
  • レイバイ ノ ビサイ リュウロ ナイ スイチョク カコウキエキ ニソウリュウ ノ アツリョク ソンシツ

この論文をさがす

抄録

Experiments were performed on two-phase pressure drop of a refrigerant R-410A flowing vertically downward in small copper circular tubes with 0.5-2.0 mm I.D., and small copper rectangular and triangular tubes with 1.04 and 0.88 mm inner hydraulic equivalent diameter, respectively, for the development of a high-performance heat exchanger using small tubes or multi-port extruded tubes for air conditioning systems.Pressure drops were measured and flow patterns were observed in the range of mass flux from 30 to 400 kg/(m2s)and quality from 0.1 to 0.9 at the saturation temperature of 10 °C. Characteristics of measured pressure drops were examined for different flow channel geometries. In high quality region or relatively high mass flux condition, the frictional pressure drop was reproduced well by the Lockhart-Martinelli correlation used together with a new correlation for Chisholm's parameter C as a function of hydraulic equivalent diameter. In low mass flux and low quality region, the frictional pressure drop was also reproduced well by multiplying the Chisholm two-phase multiplier factor by modified coefficient. In addition, flow pattern was observed with 0.5 and 2.0 mm I.D circular glass tubes. Slug flow and annular flow patterns were observed at lower and higher quality, respectively.

収録刊行物

被引用文献 (1)*注記

もっと見る

参考文献 (8)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ