CO<Sub>2</Sub> 冷媒対応スクロール圧縮機におけるラップ間に作用する押接力に関する研究

  • 鶸田 晃
    パナソニック株式会社 ホームアプライアンス社 アプライアンス開発センター
  • 澤井 清
    パナソニック株式会社 ホームアプライアンス社 アプライアンス開発センター
  • 作田 淳
    パナソニック株式会社 ホームアプライアンス社 アプライアンス開発センター
  • 森本 敬
    パナソニック株式会社 ホームアプライアンス社 アプライアンス開発センター
  • 福田 充宏
    静岡大学工学部機械工学科
  • 柳沢 正
    静岡大学工学部機械工学科

書誌事項

タイトル別名
  • A Study on Contact Force between Wraps of Scroll Compressor for CO<Sub>2</Sub> Refrigerant
  • CO2冷媒対応スクロール圧縮機におけるラップ間に作用する押接力に関する研究
  • CO2 レイバイ タイオウ スクロール アッシュクキ ニ オケル ラップ カン ニ サヨウ スル オウセツリョク ニ カンスル ケンキュウ

この論文をさがす

抄録

  The scroll compressor has two leakage passes, which are the gap in an axial direction at the tip of the wrap and the gap in a radial direction between the wraps. Many attempts to reduce the leakage through those gaps have been actively researched and developed. In this study, we grasped the characteristics of the contact force between the wraps of a CO2 scroll compressor with the fixed orbiting radius by measuring the oil-film pressure at the main bearing. In addition, we developed the analytical method to simulate the contact force considering the effect on the formation of oil-film at the bearings and move constrain of the orbiting scroll. As a result, we found that (1) there is a fluctuation of the contact force at one revolution, (2) the contact force increases with rotational speed, (3) the contact force has little change for operating condition and (4) contact force increases with decreasing the wrap clearance.

収録刊行物

参考文献 (16)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ