Isothermal Adsorption Measurement for the Development of High Performance Solid Sorption Cooling System
-
- SAHA Bidyut Baran
- Institute of Materials Chemistry and Engineering, Kyushu University
-
- KOYAMA Shigeru
- Institute of Materials Chemistry and Engineering, Kyushu University
-
- ALAM K.C.Amanul
- Graduate School of Bio-Applications and Systems Engineering, Tokyo University of Agri. & Tech.
-
- HAMAMOTO Yoshinori
- Graduate School of Bio-Applications and Systems Engineering, Tokyo University of Agri. & Tech.
-
- AKISAWA Atsushi
- Graduate School of Bio-Applications and Systems Engineering, Tokyo University of Agri. & Tech.
-
- KASHIWAGI Takao
- Graduate School of Bio-Applications and Systems Engineering, Tokyo University of Agri. & Tech.
-
- NG Kim Choon
- Department of Mechanical Systems Engineering, National University of Singapore
-
- CHUA Hui Tong
- Department of Mechanical Systems Engineering, National University of Singapore
この論文をさがす
抄録
Interest in low-grade thermal heat powered solid sorption system using natural refrigerants has been increased. However, the drawbacks of these adsorption systems are their poor performance. The objective of this paper is to improve the performance of thermally powered adsorption cooling system by selecting new adsorbent-refrigerant pairs. Adsorption capacity of adsorbent-refrigerant pair depends on the thermophysical properties (pore size, pore volume and pore diameter) of adsorbent and isothermal characteristics of the adsorbent-refrigerant pair. In this paper, the thermophysical properties of three types of silica gels and three types of pitch based activated carbon fibers are determined from the nitrogen adsorption isotherms. The standard nitrogen gas adsorption/desorption measurements on various adsorbents at liquid nitrogen of temperature 77.4 K were performed. Surface area of each adsorbent was determined by the Brunauer, Emmett and Teller (BET) plot of nitrogen adsorption data. Pore size distribution was measured by the Horvath and Kawazoe (HK) method. Adsorption/desorption isotherm results showed that all three carbon fibers have no hysteresis and had better adsorption capacity in comparison with those of silica gels.
収録刊行物
-
- 日本冷凍空調学会論文集
-
日本冷凍空調学会論文集 20 (3), 421-427, 2003
公益社団法人 日本冷凍空調学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001204666220288
-
- NII論文ID
- 10011726186
-
- NII書誌ID
- AA11125910
-
- ISSN
- 2185789X
- 13444905
-
- NDL書誌ID
- 6700402
-
- 本文言語コード
- en
-
- データソース種別
-
- JaLC
- NDL
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可