Performance and Internal Flow of Cross-Flow Fan with Inlet Guide Vane
-
- FUKUTOMI Junichiro
- Department of Mechanical Engineering, The University of Tokushima
-
- NAKAMURA Rei
- Graduate Student, The University of Tokushima
この論文をさがす
抄録
The effect of angle and length of the inlet guide vane on the performance of the cross-flow fan was examined. By installing guide vane of one sheet in tongue division side in the suction region, the performance of the cross-flow fan becomes more high pressure and high efficient than the case without the guide vane. The prerotation of the inlet flow which is counter directional with the rotation of the rotor is generated by the guide vane. In the high flow region, the high pressure and high efficiency are obtained since the suction cascade work increases by the prerotation of the flow, and since the leading edge separation of the suction cascade is more avoided to high flow. Moreover, in the low flow region, it is possible to suppress the circulating flow in scroll side in the rotor suction inlet. Therefore, the high efficiency is obtained in the low power compared to the result without the guide vane.
収録刊行物
-
- JSME International Journal Series B Fluids and Thermal Engineering
-
JSME International Journal Series B Fluids and Thermal Engineering 48 (4), 763-769, 2005
一般社団法人 日本機械学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390001204676680832
-
- NII論文ID
- 110004820245
-
- NII書誌ID
- AA10888815
-
- BIBCODE
- 2005JSMEB..48..763F
-
- ISSN
- 13475371
- 13408054
-
- NDL書誌ID
- 7697595
-
- 本文言語コード
- en
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
- KAKEN
-
- 抄録ライセンスフラグ
- 使用不可