Influence of Irradiation Time on Volumetric Shrinkage and Flexural Properties of Flowable Resins

DOI NDLデジタルコレクション Web Site PubMed 被引用文献4件 参考文献45件 オープンアクセス
  • UYAMA Satoru
    Department of Operative Dentistry, Nihon University School of Dentistry
  • IROKAWA Atsushi
    Department of Operative Dentistry, Nihon University School of Dentistry
  • IWASA Mika
    Department of Operative Dentistry, Nihon University School of Dentistry
  • TONEGAWA Motoka
    Department of Operative Dentistry, Nihon University School of Dentistry
  • SHIBUYA Yoko
    Department of Operative Dentistry, Nihon University School of Dentistry
  • TSUBOTA Keishi
    Department of Operative Dentistry, Nihon University School of Dentistry
  • TAKAMIZAWA Toshiki
    Department of Operative Dentistry, Nihon University School of Dentistry
  • MIYAZAKI Masashi
    Department of Operative Dentistry, Nihon University School of Dentistry

この論文をさがす

説明

The purpose of this study was to evaluate the influence of irradiation time on volumetric change and flexural properties of flowable resins. Four commercially available flowable resins were employed. For volumetric shrinkage measurement, resin pastes were inserted into a mold (2 mm in height, 4 mm in diameter) and put into a water-filled dilatometer. This was followed by light irradiation for 10, 20, or 30 seconds at 600 mW/cm2. Volumetric shrinkage of the specimens was then determined from the change in the height of water meniscus, and the percentage volumetric change thereof was calculated. For flexural strength measurement, resin pastes were filled into a stainless steel mold (25×2×2 mm), and the middle one-third of the specimen was first irradiated. The remaining two-thirds were irradiated under the same irradiation conditions as volumetric shrinkage measurement. After 24-hour storage in 37°C water, three-point flexural tests were performed with a span length of 20 mm at a crosshead speed of 1.0 mm/min. One-way ANOVA followed by Tukey's HSD test were used for statistical analysis. For all materials tested except Estelite Flow Quick, both volumetric shrinkage and flexural strength increased with longer light irradiation time. Results of this study indicated that both volumetric shrinkage and flexural properties were influenced by light irradiation time and resin composite type.

収録刊行物

被引用文献 (4)*注記

もっと見る

参考文献 (45)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ