Fast Prediction of Welding Distortion of Large Structures using Inherent Deformation Database and Comparison with Measurement
-
- Ma Ninshu
- Osaka University, Japan
-
- Tateishi Junya
- JSOL Corporation, Japan
-
- Hiroi Shinya
- JSOL Corporation, Japan
-
- Kunugi Atsushi
- JSOL Corporation, Japan
-
- Huang Hui
- Oak Ridge National Lab, USA
抄録
It has been reported that welding distortion can be well reproduced using inherent deformation by performing the simple elastic finite element analysis. To efficiently predict the welding distortion of large structures, the inherent deformation database in the design space of the shrinkage and bending control parameters for each basic welded joint was established through experimental measurements and nonlinear transient simulations by thermal elastoplastic FEM. Then, when welding conditions and constraint conditions used in the real production lines are different from those employed in established inherent deformation database, the estimating method of inherent deformation for practical applications is recommended. With the aid of the established inherent deformation database, the welding distortion of large structure models with/without jig constraints for the construction machinery is predicted using the enhanced elastic FEM solver and compared with experimental measurements. The efficiency and validity of the enhanced solver and the inherent deformation database are clearly demonstrated.
収録刊行物
-
- 溶接学会論文集
-
溶接学会論文集 35 (2), 137s-140s, 2017
一般社団法人 溶接学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390001204727356288
-
- NII論文ID
- 130006329357
-
- ISSN
- 24348252
- 02884771
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可