パイレツクスガラスの粗研削法の研究

DOI
  • 小林 昭
    工業技術院電気試験所工作部 正会員
  • 田中 一成
    東北大学学生 (工学部精密工学科) 学生会員

書誌事項

タイトル別名
  • On the Rough Grinding of Pyrex Glass

抄録

In the experiments on the rough grinding of Pyrex glass with various abrasive wheels, we measured the tangential grinding force and the wear of wheels under different conditions.<BR>We suggest "grindability" as a scale by which the characteristics of wheel can be judged.<BR>The results obtained are as follows:<BR>1. GC grains are suitable for Pyrex Glass.<BR>2. The above can be explained from the experiments on the shape and the strength of grain as well as from the scratch test with single grain.<BR>3. There are suitable working conditions for various kinds of wheels, especially for the grade of wheels. In general, lower peripherial speed of wheel is recommended.<BR>4. Heavier cut (deeper cut, higher work speed, larger feed of wheel) is recommended, . compared with in the case of steel.<BR>5. Applying these results to the practical job, we could save the working time largely.

収録刊行物

  • 精密機械

    精密機械 20 (231), 208-216, 1954

    公益社団法人 精密工学会

詳細情報 詳細情報について

  • CRID
    1390001204730583808
  • NII論文ID
    130003783295
  • DOI
    10.2493/jjspe1933.20.208
  • ISSN
    03743543
  • 本文言語コード
    ja
  • データソース種別
    • JaLC
    • Crossref
    • CiNii Articles
  • 抄録ライセンスフラグ
    使用不可

問題の指摘

ページトップへ