書誌事項
- タイトル別名
-
- Dynamic Behavior of Spindle Using Mounted Wheel in Internal Grinding
- ジク ツキ トイシ オ モチイタ ナイメン ケンサク ニ オケル トイシジク
この論文をさがす
抄録
In the plunge grinding, measurements were done at the displacement amplitude of vibrating wheel spindle, the grinding force, and the roundness of and the loading metal's amount along the wheel surface, and discussion was made on the dynamic behavior of the wheel spindle. The spindle in operation has two surpassed frequencies; corresponding one to the rotary speed of wheel and its double one. The former is caused by unbalanced weight of the spindle and the latter is due to unsymmetrical bending rigidity of the spindle resulting from the existence of screw holes for fastening up the wheel shaft. Consequently, loading metal develops at stationary positions along wheel periphery. In process of time, while the former scarcely undergoes a change in the vibration amplitude, the latter increases in the tangential amplitude almost proportionally to the tangential grinding force. Its proportional coefficient is affected by grinding condition, especially rotary speeds of the wheel and the work.
収録刊行物
-
- 精密機械
-
精密機械 45 (530), 168-173, 1979
公益社団法人 精密工学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001204764337280
-
- NII論文ID
- 130003784427
- 110001290568
-
- NII書誌ID
- AN00130014
-
- NDL書誌ID
- 2041988
-
- ISSN
- 03743543
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可