NC加工シミュレータの開発 システム構成方法

書誌事項

タイトル別名
  • Development of an NC machining simulator. System configuration.
  • NC カコウ シミュレータ ノ カイハツ システム コウセイ ホウホウ
  • System Configuration
  • システム構成方法

この論文をさがす

抄録

This paper presents a new method to construct a solid model based machining verification system, which includes (1) system configuration technique with three subsystems and removed volume storing for the selective visualization of machining scenes ; (2) dimensional measuring task simulation using measuring instrument models for the quantitative evaluation of machined shape. With this method, firstly the user can detect the dimensional errors on the final machined shape, and then check selectively the machining steps which yield the errors. As the result, the time consumed for step-by-step verification of NC data is reduced. Besides, the accuracy of the error detection is increased.

収録刊行物

  • 精密工学会誌

    精密工学会誌 56 (5), 891-896, 1990

    公益社団法人 精密工学会

詳細情報 詳細情報について

問題の指摘

ページトップへ