ソフトウェアサーボシステムにおけるモータの運動制御アルゴリズム (第2報)

書誌事項

タイトル別名
  • An Algorithm of Motor Control by Software Servo System (2nd Report)
  • ソフトウェアサーボシステムにおけるモータの運動制御アルゴリズムー2-4軸水平多関節形ロボットの制御への適用
  • ソフトウェア サーボ システム ニ オケル モータ ノ ウンドウ セイギョ ア
  • Application to 4-Axes SCARA ROBOT
  • 4軸水平多関節形ロボットの制御への適用

この論文をさがす

抄録

In the previous report, an algorithm to control the motor motion curve with software servo system was proposed. By the algorithm, any motion curve, such as produced with cam curves, was realized. It was applied practically to 1 axis DD motor indexing table, and some experimental results were reported. In this report the motion control algorithm is applied to 4-axes SCARA type robot control with software servo system, in PTP (point to point) and CP (continuous path) control mode. The software servo system has become main control system in robot servo motor system. To apply the algorithm to motor control in software servo system, any motion curve in multi axes robot is realized. Some experimental results, such as control accuracy in PTP motion and in CP motion measured in 4-axes SCARA type robot are reported, and by the experimental results, the algorithm is proven to be well applied to multi-axes industrial robot control with software servo system.

収録刊行物

  • 精密工学会誌

    精密工学会誌 59 (3), 423-428, 1993

    公益社団法人 精密工学会

詳細情報 詳細情報について

問題の指摘

ページトップへ