加工状態の評価に基づく切削条件設定システムに関する研究(第1報)

DOI Web Site

書誌事項

タイトル別名
  • On the System for Setting the Cutting Conditions Based on the Evaluation of Cutting State (1st Report)
  • 加工状態の評価に基づく切削条件設定システムに関する研究-1-ファジィ積分と山登り法の適用
  • カコウ ジョウタイ ノ ヒョウカ ニ モトズク セッサク ジョウケン セッテイ
  • Application of Fuzzy Integral and Hill-climbing
  • ファジィ積分と山登り法の適用

この論文をさがす

抄録

Cutting conditions have an effect on machining efficiency, machining cost and machining time. Thus, a multitude of methods have been proposed to determine the optimum cutting conditions. But each in itself is specific and has limited applicability to the situation for which it was devised. Hence, it may be said that the cutting conditions which are led from those methods are only subconditions in the machining scene. On the other hand, the skilled machinist can continuously adjust operations in terms of machining efficiency, machinability and cost. This adjustment is done by means of cutting conditions. In this paper, the system is proposed to simulate the machinist's thinking process which set the appropriate cutting conditions based on evaluation of cutting state. The thinking process is constructed by fuzzy integral and hill-climbing. The accuracy of the system's output was examined by the experiments under various cutting conditions in turning, and the validity of the system was confirmed.

収録刊行物

  • 精密工学会誌

    精密工学会誌 60 (2), 255-259, 1994

    公益社団法人 精密工学会

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ