球状黒鉛鋳鉄切削におけるセラミック工具の摩耗

DOI Web Site 被引用文献1件

書誌事項

タイトル別名
  • Wear of ceramic tool in machining of nodular cast iron.
  • キュウジョウ コクエン チュウテツ セッサク ニ オケル セラミック コウグ

この論文をさがす

抄録

Although Al2O3 ceramic tool shows an excellent performance in machining of FC (gray cast irons), it does not in machining of FCD (nodular cast irons). In this paper, cutting tests and reaction tests were conducted to find out the cause of the above phenomena. As a result of the cutting test, it was found that the matrix, carbon shape and hardness of the work material had little effects on the wear of the Al2O3 ceramic tool. And the difference in machinability of the two kinds of work material was presumed to be attributed to the reaction between tool and inclusions in work material. Therefore the reaction test was conducted between Al2O3 and MgO and the other oxide inclusions. As a result, it was found that MgO diffuses into Al2O3 ceramic tool and makes spinel called MgO·Al2O3, which decreases the wear resistance of the tool. Further, a new type of ceramic tool which was mainly made of carbides has been produced as a trial tool for FCD and its cutting performance was tested. The carbide ceramic tool showed twice as longer life than Al2O3 ceramic tool in machining of FCD.

収録刊行物

  • 精密工学会誌

    精密工学会誌 53 (4), 589-594, 1987

    公益社団法人 精密工学会

被引用文献 (1)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ