小ねじ強度試験機の試作と評価

DOI Web Site

書誌事項

タイトル別名
  • On a new tester for machine screw strength and its performance.
  • コ ネジ キョウド シケンキ ノ シサク ト ヒョウカ

この論文をさがす

説明

A new tester for the strengths of tightened machine screws was designed for getting tightening torque, tensile force and thread torque every rotational angle. Experiment using this tester was conducted on finding the relation between tightening conditions and the strengths in the case of cross recessed head machine screws (M 2 × 0.4 mm). The following results were clarified: (1) The lubrication on thread produced a larger effect for maximum tightening torque, tensile force and torque coefficient; the use of plain washer and the lubrication of bearing face, for tightening torque and torque coefficient; the materials of internal thread, for tensile force and torque coefficient; but the Cr-plating screw, less effects for the strengths. (2) The optimum testing conditions for machine screws were able to be judged using a parameter of sensitivity of the strengths, i. e. SN-ratio, and the then errors were indicated. (3) The measurement errors of the test (e. g. about 10-20% of axial force) were confirmed to agree with that of the data already reported.

収録刊行物

  • 精密工学会誌

    精密工学会誌 53 (12), 1874-1879, 1987

    公益社団法人 精密工学会

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ