差動レーザオートコリメーションに関する研究　Ｉ　　光電式オートコリメータによるピッチングの補正効果

DOI Web Site 被引用文献1件

書誌事項

タイトル別名
  • Differential laser autocollimation method. (1st Report). Correction of pitching motion by an autocollimator.
  • サドウ レーザ オートコリメーション ニ カンスル ケンキュウ 1 コウデンシ
  • Correction of Pitching Motion by an Autocollimator
  • 光電式オートコリメータによるピッチングの補正効果

この論文をさがす

説明

In order to measure geometrical shapes by a scanning method, any datum line is necessary. In general, the accuracy of the datum must be ten times as high as that of measured workpieces. The datum line is disturbed by the scanning motion and vibration or thermal deflection, even if the original datum line is accurate enough. Influence of these disturbances, can be successfully decreased by the laser autocollimation method which has been introduced by A. E. Ennos and M. S. Virdee. The autocollimation method is essentially free from the scanning error in the Z-direction. In order to suppress pitching error also, they used a pentagonal prism projecting a laser spot on a measured mirror. In this report we try to correct pitching error by measuring it through photo-electrical autocollimator. This is a kind of differential laser autocollimation methods in which the pitching error is canceled by two outputs of probes. This kind of differential laser autocollimation method can measure straight line of mirror with a repeatability of 3 nanometer. And this result promises high accuracy of a differential laser autocollimation method with two probes in measurement of straight or aspherical mirrors with large area.

収録刊行物

  • 精密工学会誌

    精密工学会誌 55 (2), 412-417, 1989

    公益社団法人 精密工学会

被引用文献 (1)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ