書誌事項
- タイトル別名
-
- General Tool Setting Error Compensation Method for 5-axis Control Ultraprecision Machining
- チョウセイミツ 5ジク セイギョ カコウ ニ オケル セッティング ゴサ ノ イッパンカ ホセイホウ
この論文をさがす
説明
The study deals with developing a new method to compensate the initial position error of diamond cutting tool in ultraprecision micromachining by use of a 5-axis control ultraprecision machining center. In the ultraprecision machining, various kinds of errors have large influence on the machining accuracy although they are very small. In recent years, the demand is increasing to fabricate complicated microparts accurately and efficiently by means of multi-axis control ultraprecision machining center. However, the accumulation of various kinds of errors due to the increasing number of motion axes and the setting difficulty of small diamond tools deteriorate the form accuracy of machined microparts. To solve these problems, the study proposes a new method to precisely measure the tool radius and to correctly set the tool, and develops the initial tool setting error compensation system. From experimental results, it is found that the method proposed in the study is effective.
収録刊行物
-
- 精密工学会誌
-
精密工学会誌 73 (10), 1154-1158, 2007
公益社団法人 精密工学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001204797158400
-
- NII論文ID
- 110006403577
-
- NII書誌ID
- AN1003250X
-
- ISSN
- 1882675X
- 09120289
-
- NDL書誌ID
- 8968144
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可