書誌事項
- タイトル別名
-
- Coordinate Measuring Machine using Parallel Mechanism (3rd Report). Abbe's Principle.
- パラレルメカニズム オ モチイタ 3ジゲン ザヒョウ ソクテイキ 3 アッベ ノ ゲンリ
- Abbe's Principle
- アッベの原理
この論文をさがす
説明
This study has proposed a new coordinate measuring machine (CMM) based on a spatial parallel mechanism consisting of closed loop link mechanism. In conventional CMM employing of XYZ mechanism, the motion error of the mechanism strongly influences the measurement accuracy because of violation of the Abbe's principle which is the basis of the precision measurement. In this paper, the relationship between the link layout of proposed mechanism and the influence of joint runouts on the measurement error has been investigated analytically and experimentally. The obtained main results are as follows. (1) The joint runout in the scale direction strongly affects the measurement error. (2) Effects of the runouts except the scale direction are negligible when the measuring point is in the extensional direction of the scale. (3) The dispersion of measured value has decreased in above link layout. In conclusion, the Abbe's principle can be applied in proposed parallel mechanism.
収録刊行物
-
- 精密工学会誌
-
精密工学会誌 66 (9), 1378-1382, 2000
公益社団法人 精密工学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390001204797280512
-
- NII論文ID
- 110001372952
-
- NII書誌ID
- AN1003250X
-
- ISSN
- 1882675X
- 09120289
-
- NDL書誌ID
- 5468720
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDLサーチ
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可
