セラミックス二次元切削時のき裂進展長さ及びき裂進展抑止上限切込み深さ　　円管の押広げ解を援用した場合の推定

DOI Web Site 被引用文献1件

書誌事項

タイトル別名
  • Lengths of crack extension and upper limits of depth of cut preventing crack extension in orthogonal cutting of ceramics - Their estimation using the stress field of the expansion of a cylindrical tube.
  • セラミックス 2ジゲン セッサクジ ノ キレツ シンテン ナガサ オヨビ キレ
  • Their Estimation Using the Stress Field of the Expansion of a Cylindrical Tube
  • 円管の押広げ解を援用した場合の推定

この論文をさがす

抄録

A crack extension problem based on the fracture mechanics is solved to estimate the length of downward extension of a crack and the upper limit of depth of cut preventing its extension in orthogonal cutting of ceramics. To solve the problem evidently in conjection with mechanical properties of the work, the stress field of the expansion of a cylindrical tube is successfully applied to the elasto-plastic tensile stress field in the work by the tool progress. It is shown that the length of the crack extension is uniquely determined by the combination among the depth of cut, the fracture toughness and the yield strength. The upper limit of depth of cut is found to be proportional with square of the ratio of the fracture toughness for micro crack-to-the yield strength. The estimated value of the upper limit of depth of cut coincides approximately with that of experiment for alumina ceramics and soda-lime glass.

収録刊行物

  • 精密工学会誌

    精密工学会誌 53 (11), 1758-1764, 1987

    公益社団法人 精密工学会

被引用文献 (1)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ