書誌事項
- タイトル別名
-
- Diode Laser Forming of Thin Metal Plate Using Pre-bending Effect.
- ショキ マゲ オ リヨウ シタ ハンドウタイ レーザビーム ニ ヨル キンゾク ウスイタ ノ マゲ カコウ
この論文をさがす
抄録
Diode laser beam of 10W is applied to laser forming of stainless steel of 0.1 mm in thickness. The effect of pre-bending is discussed on the basis of the experimental results. The pre-bent plate is always bent towards the pre-bending direction whether or not the beam is irradiated on the opposite surface of the plate. Furthermore, the range where the pre-bending effect works is also discussed. From the experimental characteristics, objects of complicated shapes are made and demonstrated; furthermore, the making procedure is described.
収録刊行物
-
- 精密工学会誌
-
精密工学会誌 68 (5), 700-704, 2002
公益社団法人 精密工学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001204798155648
-
- NII論文ID
- 110001373425
-
- NII書誌ID
- AN1003250X
-
- ISSN
- 1882675X
- 09120289
- http://id.crossref.org/issn/09120289
-
- NDL書誌ID
- 6157308
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可