書誌事項
- タイトル別名
-
- Ultra precision cutting of electroless nickel plating layer.
- ムデンカイ Ni P メッキ ノ チョウ セイミツ セッサク カコウ
この論文をさがす
抄録
This research is primarily aimed at the investigation of ultra precision cutting for the electroless nickel plating process. The electroless nickel plating process and subsequent heat treatment were adjust so that samples with three different phosphorus contents (5.5, 8.5 and 12.0 wt%); therefore, different microstructures and hardnesses were obtained. All samples were treated by the heat treatment conditions at 373, 473, 573 and 673K from 1to 3 hours. The conclusion drawn from this work is that electroless nickel plating for ultra precision cutting should contain at least an amorphous structure to obtain a high quality machined surface. Also, the nickel phosphorus plating material in heat treatment at 473K for 2hours is lightest damage for machined surface layer. The chip profile of ultra precision cutting appeared to have a lamellar structure for an amorphous structure
収録刊行物
-
- 精密工学会誌
-
精密工学会誌 53 (5), 814-819, 1987
公益社団法人 精密工学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390001204798259968
-
- NII論文ID
- 110001369202
- 10004219777
-
- NII書誌ID
- AN1003250X
-
- ISSN
- 1882675X
- 09120289
-
- NDL書誌ID
- 3129256
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可