Effects of Temperature and Strain Rate on Stress-Strain Curves for Dual-Phase Steels and Their Calculations by Using the Kocks-Mecking Model

Tsuchida Noriyuki, Izaki Yoshimasa, Tanaka Tomoyuki, Fukaura Kenzo

doi:10.2355/isijinternational.52.729

Bibliographic Information

Other Title

Ｄｕａｌ－Ｐｈａｓｅ鋼の応力‐ひずみ曲線におよぼす温度とひずみ速度の影響とＫｏｃｋｓ‐Ｍｅｃｋｉｎｇモデルによる定式化
Dual-Phase鋼の応力-ひずみ曲線におよぼす温度とひずみ速度の影響とKocks-Meckingモデルによる定式化
Dual Phase コウノオウリョクヒズミキョクセンニオヨボスオンドトヒズミソクドノエイキョウト Kocks Mecking モデルニヨルテイシキカ

Search this article

Description

Effects of temperature and strain rate on stress–strain curves for two types of dual-phase (DP) steel with different carbon contents were investigated from the viewpoints of tensile tests and the Kocks–Mecking (KM) model based on thermal activation theory. In the tensile tests, flow stress increased but elongation decreased with decreasing temperature or increasing strain rate. Uniform elongation for each DP steel was almost independent of deformation temperature between 123 and 373K. In the comparison of strain rate sensitivity exponent (m), the m-value increased with decreasing the volume fraction of martensite. The calculated true stress–true strain curves by using the KM model agreed with the measured ones at various temperatures and strain rates for the DP steels. In terms of the parameters for the KM model, the athermal stress and mechanical threshold stresses were different between the two types of DP steel. This seems to be associated with the difference of volume fractions of ferrite and martensite.

Journal

Tetsu-to-Hagane

Tetsu-to-Hagane 97 (4), 201-208, 2011

The Iron and Steel Institute of Japan

Keywords

Details 詳細情報について

Export

Report a problem