書誌事項
- タイトル別名
-
- Development of Single Crystalline Bone Plate with Low Young’s Modulus Using Beta-type Ti-15Mo-5Zr-3Al Alloy
- β型Ti-15Mo-5Zr-3AI合金単結晶を用いた低ヤング率ボーンプレートの開発
- vガタ Ti-15Mo-5Zr-3AI ゴウキンタンケッショウ オ モチイタ テイヤングリツ ボーンプレート ノ カイハツ
この論文をさがす
抄録
New single crystalline bone plate that has extremely low Young’s modulus was fabricated using an ISO certified biomedical material alloy with a composition of Ti-15Mo-5Zr-3Al in mass %. Single crystals of the Ti-15Mo-5Zr-3Al alloy along [001] direction were succeeded to be grown by using the seed crystal in order to develop the long bone plate along the [001] direction with the lowest Young’s modulus. The ω phase with relatively high Young’s modulus was not confirmed to precipitate in the single crystals at room temperature. Using the oriented single crystals, bone plate with dimensions of 42 × 5 × 1.5 mm3 and 8 holes for screws could be shaped to be along [001], which exhibit the superior low Young’s modulus of ~40 GPa comparable to that along the longitudinal bone axis. The developed single crystalline bone plate has a high potential for a clinical use in the orthopedic field.
収録刊行物
-
- 鉄と鋼
-
鉄と鋼 101 (9), 501-505, 2015
一般社団法人 日本鉄鋼協会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390001205126148608
-
- NII論文ID
- 130005094601
-
- NII書誌ID
- AN00151251
-
- ISSN
- 18832954
- 00211575
-
- NDL書誌ID
- 026730487
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
- KAKEN
-
- 抄録ライセンスフラグ
- 使用不可