36%Ni-Fe合金鋼の熱延エッジ割れに及ぼす加熱温度の影響

書誌事項

タイトル別名
  • Influence of Heating Temperature on Edge Crack in Hot Rolling of 36%Ni-Fe Alloy
  • 36%Ni-Fe ゴウキンコウ ノ ネツエン エッジ ワレ ニ オヨボス カネツ オンド ノ エイキョウ

この論文をさがす

抄録

For the purpose of edge crack control in hot rolling of 36%Ni-Fe alloys, a high temperature tensile test and laboratory-scale hot rolling experiment were carried out. Intergranular oxidation has been considered to be one of the major factors in edge cracking. Edge cracks which initiate from intergranular oxidation grow to the inner side along coarse grain boundaries as the thickness reduction ratio increases. The depth of intergranular oxidation increases at higher reheating temperatures. However, recrystallization occurs at the crack tip, and this has the effect of suppressing crack growth. This suggests that promoting recrystallization during hot rolling by increasing the reheating temperature, rather than inhibition of intergranular oxidation as such, is effective for suppressing edge cracking.

収録刊行物

  • 鉄と鋼

    鉄と鋼 101 (5), 293-299, 2015

    一般社団法人 日本鉄鋼協会

参考文献 (7)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ