作業中に生ずるといしと工作物の相互位置の変化が, といしの切込み量におよぼす影響

DOI DOI Web Site Web Site Web Site

書誌事項

タイトル別名
  • The Effect of the Relative Displacement between the Grinding Wheel and the Work on the Wheel Depth of Cut in Grinding Operation
  • サギョウチュウ ニ ショウズル ト イシ ト コウサクブツ ノ ソウゴ イチ ノ ヘンカ ガ , ト イシ ノ キリコミ リョウ ニ オヨボス エイキョウ

この論文をさがす

抄録

The displacement of the relative position of the grinding wheel and the work at grinding operation is investigated. The true and the equivalent wheel depth of cut, the decrease of work radius, and the cutting residue are computed under the following assumptions. (1) The effect of the vibration is ignored. (2) The relative displacement between the grinding wheel and the work is elastic and proportional to grinding force. (3) The parallel movement of the work and the grinding wheel caused by the grinding force is assumed, respectively. (4) The wear of the grinding wheel is ignored. The analysis shows that the equivalent wheel depth of cut is equal to the amount of the wheel-head advance at each pass when the number of passes is increased.

収録刊行物

詳細情報 詳細情報について

問題の指摘

ページトップへ