Faundamental Research on the Gear Lubrication : 3rd Report, The Gear Lubricating Performance Test with Power Circulating System
Bibliographic Information
- Other Title
-
- 歯車潤滑の基礎研究 : 第3報, 動力循環式歯車試験機による潤滑性能試験
- ハグルマ ジュンカツ ノ キソ ケンキュウ 3
Search this article
Abstract
For the purpose of improving lubricating performance on the gear-tooth surface, the authors investigated the relationships of lubrication properties to the driving conditions and the lubricating methods with the gear lubricating tester used a power circulating system with which the frictional moment and the oil-film thickness between gear-teeth were measured. The lubricating characteristics have been classified by the values of the dimentionless parameter ηvr/P^-n as follows : boundary lubrication ≤5×10-6≤ semi-fluid lubrication ≤5×10-4≤ fluid lubrication. Owing to the effects of the discontinuous contact, the dynamic load, the variation of frictional direction and the surface roughness on the gear-tooth surface, the frictional coefficient is larger and the oil-film thickness is smaller than those obtained respectively on the roller surface which was considered in the equivalent condition to the gear-tooth surface. The agitating resistance in the oil-bath lubrication is much influenced by the oil viscosity, the rotating speed and the oil amount.
Journal
-
- Transactions of the Japan Society of Mechanical Engineers
-
Transactions of the Japan Society of Mechanical Engineers 27 (184), 1961-1970, 1961
The Japan Society of Mechanical Engineers
- Tweet
Details 詳細情報について
-
- CRID
- 1390001205155289856
-
- NII Article ID
- 110002351559
-
- NII Book ID
- AN00187419
-
- ISSN
- 21859485
- 00290270
-
- NDL BIB ID
- 9150892
-
- Text Lang
- ja
-
- Data Source
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- Abstract License Flag
- Disallowed