書誌事項
- タイトル別名
-
- Physical Properties of Ceramic Tool Material : Especially on the Adhesion of Ceramics
- セラミック コウグ ザイリョウ ノ ブツリテキ セイシツ
この論文をさがす
抄録
This paper describes the adhesion of cutting tools at high temperature from the results of empirical cutting data and fundamental test with the adhesion between cutting tool tips and materials cut. The experiment for statical test of adhesion was carried out with the Vickers hot hardness testing machine. In consequence, we found that the critical temperature for adhesion was affected by the chemical composition of ceramics and kinds of metals, and that the strength of interface between metals and ceramic tips was weaker than in the case of carbides and this fact was recognized as a reason for that crater wear and built up edge for ceramics were less than those for carbides.
収録刊行物
-
- 日本機械学會論文集
-
日本機械学會論文集 26 (163), 418-422, 1960
一般社団法人 日本機械学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001205155537152
-
- NII論文ID
- 110002351140
-
- NII書誌ID
- AN00187419
-
- ISSN
- 21859485
- 00290270
-
- NDL書誌ID
- 9150533
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可