書誌事項
- タイトル別名
-
- A Study on Chip Breaker
- チップブレーカ ノ ケンキュウ
この論文をさがす
抄録
Limiting conditions of chip breaking with a parallel type chip breaker are found to be determined by only the following three items : the radius of chip flow circle, the material to be cut and the thickness of chip. The larger the radius of chip flow circle, the steeper the slant of chip breaker and the thinner the chip, the smaller is the force acting on a chip breaker due to chip curling. The yield stress of chip becomes about twice that of the same material before cut. From these results, a very simple method for finding the optimum shape of chip breaker is established. In this method, a proper radius of chip flow circle is found directly by measuring the thickness of chip which is obtained under the given cutting conditions and by the use of a diagram presented in this paper.
収録刊行物
-
- 日本機械学會論文集
-
日本機械学會論文集 27 (178), 833-843, 1961
一般社団法人 日本機械学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001205158145152
-
- NII論文ID
- 110002351418
- 10003129156
-
- NII書誌ID
- AN00187419
-
- ISSN
- 21859485
- 00290270
-
- NDL書誌ID
- 9150770
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可