電子冷凍素子による熱伝導率計

DOI DOI Web Site Web Site Web Site

書誌事項

タイトル別名
  • Thermoelectric Cooling Elements (=TE) as Thermal Conductivity Meter
  • デンシ レイトウ ソシ ニ ヨル ネツ デンドウリツケイ

この論文をさがす

抄録

Thermoelectric Cooling Elements (=TE) were applied to measure thermal conductivities (=λ) of some materials. By this method, the measuring process becomes very simple and fast compared with ordinary one and does not need the preparation of large specimen. The principle of this method is as follows : the specimen (membraneous material) is inserted between the cold junction* of a TE and the hot junction* of the other TE. In the stationary state of this condition, the temperature difference between the cold and the hot junctions of each TE is determined by λS/d** of the specimen, and Seebeck counter electromotive force is parallel to the temperature difference. Therefore, the value of λ of the specimen can be obtained through the measurement of this counter electromotive force. * must be as flat as possible ** S : area of cross section, d : thickness

収録刊行物

詳細情報 詳細情報について

問題の指摘

ページトップへ