書誌事項
- タイトル別名
-
- Dynamic Loads on Spur Gear Teeth Having Pitch Errors at the High Speed
- ピッチ ゴサ ノ アル ヒラハグルマ ノ コウソクド ニ オケル ドウ カジュウ
この論文をさがす
抄録
Dynamic loads on spur gear teeth are examined by a gear testing machine and a strain gauge apparatus. The ground pinion and gear are tested at the periphery speed 80 m/s and below. Some teeth of the gear have normal pitch errors which were given about 15μ on purpose. The magnitude of the dynamic load increases at the critical speed at which the conjugating frequency is equal to the natural frequency of the vibratory system consisting of the pinion, gear and the teeth stiffness. At a speed higher than the critical speed, the heavy dynamic load occurs on the tooth which has the postitive error. If there is a tooth which has the negative error, the tooth tends to carry no load, and the heavy dynamic load will occur after several teeth. The calculated results, which are analysed as a vibration problem, are nearly coincident with the measured results.
収録刊行物
-
- 日本機械学會論文集
-
日本機械学會論文集 27 (181), 1468-1476, 1961
一般社団法人 日本機械学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001205158950400
-
- NII論文ID
- 110002351497
-
- NII書誌ID
- AN00187419
-
- ISSN
- 21859485
- 00290270
-
- NDL書誌ID
- 9150831
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可