書誌事項
- タイトル別名
-
- Stiffness of Externally Pressurized Journal Bearing : Part 1, On the Static Stiffness
- セイアツ ジャーナル ジクウケ ノ ゴウセイ 1
この論文をさがす
抄録
The use of the sliding bearing has been steadily decreasing since the development of commertial rolling contact bearing. But if it were possible to produce an externally pressurized bearing which possesses very high stiffness, then this bearing would have the following desirable characteristics : (1) low frictional torque, (2) very high stiffness, (3) load supportability when not rotating, and (4) smooth operation. Mayer has investigated to produce such a bearing. So we have experimentally researched on the inprovement of static stiffness after his investigation, and the results obtained are as follows ; The stiffness obtained from experimental research is qualitatively similar to, but pretty smaller than that obtained from Mayer's theory this theory. When we use the spool valve as the variable external restriction, the bearing stiffness is much greater than that with the fixed external orifice restriction.
収録刊行物
-
- 日本機械学會論文集
-
日本機械学會論文集 29 (199), 543-553, 1963
一般社団法人 日本機械学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001205159309568
-
- NII論文ID
- 110002351807
-
- NII書誌ID
- AN00187419
-
- ISSN
- 21859485
- 00290270
-
- NDL書誌ID
- 9151139
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可