18-8ステンレス鋼と各種工具材料との溶着性

DOI DOI Web Site Web Site Web Site

書誌事項

タイトル別名
  • Adhesions between Various Tool Materials and 18-8 Stainless Steel
  • 18-8 ステンレス コウ ト カクシュ コウグ ザイリョウ ト ノ ヨウチャクセイ

この論文をさがす

抄録

This paper describes the adhesions of 18-8 stainless steel to various tool materials (carbon Steel, High Speed Steels, Carbides and Ceramic) on the basis of the friction tests. Adhesions of 18-8 stainless steel to tool materials can be avoided by preventing the bare Austenitic structure from the contact of the tool materials as much as possible. One way for attaining this purpose is an application of cutting fluid containing extreme pressure agents and the other is to vary the structure of 18-8 stainless steel-for example, from Austenite to Martensite. The results are as follows : (1) At higher speed, Carbide with sulphurized oil (active) is best and at lower speed, High Speed Steel with sulphurized oil (active). (2) Low temperature cutting with Carbide is effective for preventing adhesions of 18-8 stainless steel.

収録刊行物

詳細情報 詳細情報について

問題の指摘

ページトップへ