書誌事項
- タイトル別名
-
- A Study on the Plastic Bending of Sheet Metals : 3rd Report, The Spring Back of the Clad Sheet Metals, Part 2
- ウスイタ ノ マゲ カコウ ニ カンスル ケンキュウ 3
この論文をさがす
抄録
In this paper, the spring back in the plastic bending of a single clad sheet metal was treated theoretically and experimentally in the same way as in that of a double clad sheet metal previously reported. In consideration of the variations of the stress states in loading due to the work conditions and the differences among the mechanical properties of the clad and base metal of the clad sheet metals, eighteen equations for the spring back were obtained theoretically. The results of the spring back calculations agree well with the experimental results. Then, the effect of the clad ratios etc. on the spring back is made clear. Brass, Phosphor-Bronze and Nickel-Silver clad in Silver were used as the tested materials.
収録刊行物
-
- 日本機械学會論文集
-
日本機械学會論文集 28 (193), 1139-1148, 1962
一般社団法人 日本機械学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001205159606016
-
- NII論文ID
- 110002351676
-
- NII書誌ID
- AN00187419
-
- ISSN
- 21859485
- 00290270
-
- NDL書誌ID
- 9151024
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可