書誌事項
- タイトル別名
-
- INFLUENCE OF JOIST MEMBER SHAPE AND FORM EXTRUSION DIRECTION ON FORMWORK RIGIDITY:
- ハッポウ タイケイワク ゴウセイ エ ノ コンタイザイ ケイジョウ オヨビ オシダシ ホウコウ ノ エイキョウ : オシダシホウ ポリスチレンフォーム オ モチイタ スラブ カタワク ノ コウゾウ セイノウ(ソノ 2)
- Mechanical property evaluation of insulated formwork made from extruded polystyrene foam (Part 2)
この論文をさがす
抄録
We previously reported on the required mechanical characteristics and a deformation evaluation method for thermal insulators used in floor slabs directly above footing beams, and for formworks composed of extruded polystyrene foam that don’t require removal.<br>In the present study, bending and bearing pressure experiments were conducted on a component specimen, focusing on (1) the bending stiffness of the formwork when the polystyrene foam extrusion direction is perpendicular to the formwork bearing span, and (2) the bearing stiffness against a square pipe used as a joist member.<br>Moreover, a full-scale experiment was conducted using loads equivalent to those during actual construction, and it was confirmed that the foam formwork deformation during construction can be assessed based on the stiffness obtained from the component experiment.<br>In this paper, the scope of the evaluation of foam formworks in the previous report is expanded based on the results of these experiments.
収録刊行物
-
- 日本建築学会技術報告集
-
日本建築学会技術報告集 23 (54), 375-380, 2017
一般社団法人 日本建築学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001205173769472
-
- NII論文ID
- 130006891472
- 40021240754
-
- NII書誌ID
- AN10531441
-
- ISSN
- 18818188
- 13419463
-
- NDL書誌ID
- 028327048
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可