BURNING EXPERIMENTS ON WALLS USING WOODEN INTERIOR FINISH WITH SPRINKLER ACTIVATING
-
- NOAKI Masaki
- Grad. Sch. of Global Fire Sci. and Tech., Tokyo Univ. of Science
-
- SUZUKI Minoru
- Grad. Sch. of Sci. and Eng., Tokyo Univ. of Science
-
- SUZUKI Jun-ichi
- Building Research Institute
-
- YAMAGUCHI Jun-ichi
- Obayashi Corporation Technical Research Institute
-
- OHMIYA Yoshifumi
- Faculty of Engineering, Tokyo Univ. of Science
Bibliographic Information
- Other Title
-
- スプリンクラー作動時の木製内装材を用いた壁の燃焼実験
- スプリンクラー サドウジ ノ モクセイ ナイソウザイ オ モチイタ カベ ノ ネンショウ ジッケン
Search this article
Abstract
Several experiments were carried out to grasp burning behavior of wall using wooden interior material with sprinkler activating in unenclosed space. As for specimens, Japanese cedar plywood (24 mm thick) and lumber core plywood (12 mm thick) were selected. The size of specimens was 1820 mm wide and 2730 mm high. Regarding the experimental conditions, the incident heat flux onto the specimens by heat source was about 30 kW/m2 at the distance of 455 mm from the bottom of the specimens, and water supply rate was 80 L/min. As the result of the experiments, heat release rate reached about 300kW which was one of heat source after sprinkler activated. Char depths of the sprinkled specimens were less than 3mm.
Journal
-
- AIJ Journal of Technology and Design
-
AIJ Journal of Technology and Design 20 (45), 593-598, 2014
Architectural Institute of Japan
- Tweet
Details 詳細情報について
-
- CRID
- 1390001205174686336
-
- NII Article ID
- 130004507373
-
- NII Book ID
- AN10531441
-
- ISSN
- 18818188
- 13419463
-
- NDL BIB ID
- 025600734
-
- Text Lang
- ja
-
- Data Source
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- Abstract License Flag
- Disallowed