Creep Rupture Strength and Microstructure of Low Si-12Cr Heat Resisting Steel
-
- PARK Ik-min
- Graduate School, The University of Tokyo
-
- ASAKURA Kentaro
- Faculty of Engineering, The University of Tokyo
-
- FUJITA Toshio
- Faculty of Engineering, The University of Tokyo
-
- WATANABE Juro
- Muroran Plant, The Japan Steel Works,Ltd.
Bibliographic Information
- Other Title
-
- 低Si-12Cr耐熱鋼のクリープ破断強さと微細組織
- テイ Si 12Cr タイネツ コウ ノ クリープ ハダン ツヨサ ト ビサイ
Search this article
Abstract
The beneficial characteristic of vacuum carbon deoxidized low-Si steels, in which macro-segregation in large ingots was hardly observed, was applied to a 12Cr heat resisting steel. The studies on the microstructures and creep rupture properties for a low Si-12Cr-1.5Mo-0.2V-0.05Nb steel after various heat treatments were carried out. The creep recovery process, the precipitation characteristics of M23C6, and the dissolution and agglomeration of the fine precipitates was investigated by the aid of transmission electron microscope. Furthermore, the effects of prior tempering temperature and creep stress on the microstructures and mechanical properties were also investigated. <BR>This steel exhibits a creep rupture strength 1.4 times higher than that of the conventional super 12Cr rotor steels. The austenitizing temperature effective for the long term creep strength was found to be in the range of 1050°C-1100°C and optimum prior tempering temperature was about 700°C.
Journal
-
- Tetsu-to-Hagane
-
Tetsu-to-Hagane 66 (1), 82-91, 1980
The Iron and Steel Institute of Japan
- Tweet
Keywords
Details 詳細情報について
-
- CRID
- 1390001205183296768
-
- NII Article ID
- 110001488050
-
- NII Book ID
- AN00151251
-
- ISSN
- 18832954
- 00211575
-
- NDL BIB ID
- 2167257
-
- Data Source
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- Abstract License Flag
- Disallowed