A Mathematical Model of Crop Loss and Its Applications to Minimizing Crop Loss in Slabbing and Blooming
-
- TSUDA Osamu
- Central Research Laboratory, Kobe Steel, Ltd.
-
- MIZUTA Atsuo
- Central Research Laboratory, Kobe Steel, Ltd.
-
- YAMAGUCHI Yoshihiro
- Central Research Laboratory, Kobe Steel, Ltd.
-
- OSUNA Hiroshi
- Central Research Laboratory, Kobe Steel, Ltd.
-
- TOMONAGA Mitsuo
- Kakogawa Works, Kobe Steel, Ltd.
-
- SAITO Shunji
- Kakogawa Works, Kobe Steel, Ltd.
-
- DOI Kenji
- Kobe Works, Kobe Steel, Ltd.
Bibliographic Information
- Other Title
-
- 分塊圧延時のクロップロス予測モデルとその最小化問題への適用
- ブンカイ アツエンジ ノ クロップ ロス ヨソク モデル ト ソノ サイショウ
Search this article
Abstract
To formulate an optimum condition for minimizing crop loss in slabbing and blooming, the crop calculation program has been constructed on the basis of the model tests for plasticine and hot steel. In slabbing, it is shown that the influence of each factor of ingot size, ingot end profile, and rolling schedule upon crop loss formation changes in different ways according to the choice of their combination by use of the crop calculation program. The optimum rolling condition also depends upon the production mix of slabs.<BR>The crop calculation program is applicable to minimize crop loss in blooming, as well. It is shown that most of crop loss is formed in the earlier stage of rolling schedule before the groove rolling pass, and that the influence of reduction at each pass on the change of crop loss decreases in proportion to the increase of pass number.
Journal
-
- Tetsu-to-Hagane
-
Tetsu-to-Hagane 67 (15), 2365-2374, 1981
The Iron and Steel Institute of Japan
- Tweet
Keywords
Details 詳細情報について
-
- CRID
- 1390001205183411968
-
- NII Article ID
- 110001488427
-
- NII Book ID
- AN00151251
-
- ISSN
- 18832954
- 00211575
-
- NDL BIB ID
- 2332881
-
- Data Source
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- Abstract License Flag
- Disallowed