粘土系鉄鉱石微粉部の選択造粒による焼結溶融反応の改善

書誌事項

タイトル別名
  • Improvement of the Melting Reaction in Sintering Process by the Fine Part Selective Granulation of Clayish Iron Ores
  • ネンドケイ テッコウセキ ビフンブ ノ センタク ゾウリュウ ニヨル ショウケ

この論文をさがす

抄録

In order to clarify the melting reaction of iron ores with limestone fines, the melt formation process was directly observed. Single particle firing tests and small packed bed firing tests were carried out for evaluating the sintering performance of sinter mix pseudo-particles.<BR>It was made clear from the direct observation of melt formation that the melting behavior of solid phases formed from primary melt is important to improve the coalescence of sinter mix pseudo-particles. The iron ores containing quartzite (“quartz-rich iron ore”) are easier in forming the melt than the ores containing much clay minerals (“clayish iron ore”).<BR>The pseudo-particle using fine clayish iron ores as the adhering part was strong both before and after firing. The results of a small packed bed sintering test showed that segregation of limestone in sinter mix is effective in forming the melt. The increase in limestone concentration of quartz-rich iron are fines which are adhering to a coarse nucleus particle is the most effective for coalescing pseudo-particles and for making a desirable pore network during sintering.<BR>On the basis of these results, the “fine part selective granulation method of clayish iron ores” was newly proposed to improve the sintering performance of iron ores.

収録刊行物

  • 鉄と鋼

    鉄と鋼 83 (4), 233-238, 1997

    一般社団法人 日本鉄鋼協会

被引用文献 (13)*注記

もっと見る

参考文献 (15)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ