超音波干渉法による薄鋼板の音速2次元分布の迅速測定システム

DOI Web Site Web Site 参考文献11件

書誌事項

タイトル別名
  • A Sound Velocity Measurement System for Thin Steel Sheet Based on Ultrasonic Interferometry
  • チョウオンパ カンショウホウ ニヨル ウスコウハン ノ オンソク 2ジゲン ブ

この論文をさがす

抄録

A measurement system has been developed in which the sound velocity of thin steel sheet is measured quickly and displayed as a two-dimensional distribution. In the system the velocity is obtained from the peak amplitude of ultrasonic wave (multiple interfered echo reflected from the specimen). This system is characterized by the use of ultrasonic tone burst wave being transmitted through specimen to eliminate the disturbance of the first surface echo. This measurement system was applied to the observation of the growth of secondary recrystallized grain in grainoriented electrical steel sheet. The results were as follows.<BR>1) The amplitude of multiple echo increases with the number of burst waves up to about 50 waves.<BR>2) The relation between the amplitude of multiple echo and the sound velocity shows a typical resonance curve in which half-width is about 450m/s and the maximum inclination is 0.34% per lm/s.<BR>3) The two-dimensional display of the secondary recrystallized structure by the ultrasonic wave method shows a good agreement with that by the conventional macro-etching technique.<BR>4) This ultrasonic wave method is applicable for the observation of the growth of secondary recrystallized grain in grainoriented electrical steel sheet.

収録刊行物

  • 鉄と鋼

    鉄と鋼 83 (4), 245-250, 1997

    一般社団法人 日本鉄鋼協会

参考文献 (11)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ