焼結ベッド下部での通気スリットの形成とその焼結への影響

DOI Web Site Web Site 被引用文献5件 参考文献11件

書誌事項

タイトル別名
  • Formation of the Vertical Slits in the Lower Part of a Sintering Bed and Their Effect on Sintering
  • ショウケツ ベッド カブ デ ノ ツウキ スリット ノ ケイセイ ト ソノ シ

この論文をさがす

抄録

The conditions for stable formation of vertical slits in the lower part of the sintering bed and their effect on the sintering were investigated. The effect of the slits was evaluated experimentally with a test pot, feeding simulator and commercial plant. The total pressure drop was decreased and the permeability in the bed was improved by the formation of vertical slits. The gas flow rate in the slits was calculated at 1.8 times as large as that of a conventional bed. Moisture condensation, which decreases the void fraction in the sintering bed, is reduced by this increased gas flow rate. To form slits, plates were inserted vertically in the lower part of the raw material on the pallet of sintering machine. The ratio of the height of the plates to the distance between plates should be under 0.5 for stable feeding without stagnation of the raw material.

収録刊行物

  • 鉄と鋼

    鉄と鋼 83 (7), 413-418, 1997

    一般社団法人 日本鉄鋼協会

被引用文献 (5)*注記

もっと見る

参考文献 (11)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ