高速実験炉「常陽」照射試験用金属燃料要素の製造

  • 中村 勤也
    (財)電力中央研究所 原子力技術研究所 次世代サイクル領域
  • 尾形 孝成
    (財)電力中央研究所 原子力技術研究所 次世代サイクル領域
  • 菊地 啓修
    (独)日本原子力研究開発機構 原子力基礎工学研究部門 超ウラン元素燃料高温化学研究 G
  • 岩井 孝
    (独)日本原子力研究開発機構 原子力基礎工学研究部門 超ウラン元素燃料高温化学研究 G
  • 中島 邦久
    (独)日本原子力研究開発機構 原子力基礎工学研究部門 超ウラン元素燃料高温化学研究 G
  • 加藤 徹也
    (財)電力中央研究所 原子力技術研究所 次世代サイクル領域
  • 荒井 康夫
    (独)日本原子力研究開発機構 原子力基礎工学研究部門 超ウラン元素燃料高温化学研究 G
  • 魚住 浩一
    (財)電力中央研究所 原子力技術研究所 次世代サイクル領域
  • 土方 孝敏
    (財)電力中央研究所 原子力技術研究所 次世代サイクル領域
  • 小山 正史
    (財)電力中央研究所 原子力技術研究所 次世代サイクル領域
  • 大森 雄
    (独)日本原子力研究開発機構 大洗研究開発センター 燃料材料試験部
  • 三村 英明
    (独)日本原子力研究開発機構 大洗研究開発センター 燃料材料試験部
  • 板垣 亘
    (独)日本原子力研究開発機構 大洗研究開発センター 高速実験炉部
  • 曽我 知則
    (独)日本原子力研究開発機構 大洗研究開発センター 高速実験炉部
  • 青山 卓史
    (独)日本原子力研究開発機構 大洗研究開発センター 高速実験炉部

書誌事項

タイトル別名
  • Fabrication of U-Pu-Zr Metallic Fuel Elements for the Irradiation Test at Experimental Fast Test Reactor Joyo
  • コウソク ジッケンロ 「 ジョウ ヨウ 」 ショウシャ シケン ヨウキンゾク ネンリョウ ヨウソ ノ セイゾウ

この論文をさがす

抄録

  The Central Research Institute of Electric Power Industry and Japan Atomic Energy Agency have fabricated the first sodium-bonded metallic fuel elements in Japan as a collaborative research for the irradiation test at the experimental fast test reactor Joyo. The U-20 wt.%Pu-10 wt.%Zr fuel slugs of 200 mm length and approximately 5 mm diameter were fabricated in a small-scale injection casting furnace using U metal, U-Pu alloy and Zr metal. The fuel slugs met the specifications determined on the basis of the specifications of the Experimental Breeder Reactor II driver fuels in the United States and the results of preliminary casting tests. Each fuel slug was loaded into a ferritic-martensitic stainless steel (PNC-FMS) cladding tube with a few pieces of sodium rods as thermal bonds, the U-10 wt.%Zr thermal insulator and the PNC-FMS reflector in a helium gas atmosphere glove box. After top-end plug welding to the cladding tube and the heat treatment of the welding area, each fuel element was subjected to sodium bonding to fill the annular gap between the fuel slug and the cladding with the melted sodium. After inspection, six metallic fuel elements were manufactured successfully and transferred to the Joyo site.<br>

収録刊行物

被引用文献 (1)*注記

もっと見る

参考文献 (46)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ