現場計測データを用いたテールボイド厚さ分布の算定手法

DOI

書誌事項

タイトル別名
  • Calculation method on tail void thickness distribution by using in-situ data

この論文をさがす

説明

To establish a more precise inspection method on backfill grouting thickness distribution especially at a sharp curve, the calculation method on tail void thickness distribution was developed, based on the examination on the characteristicsof in-situ measured data concerning with tail void. Furthermore, its performancewas validated by applying this method to the in-situ data. As a result, the followings were made clear: 1) even if copy cutter range is same, overcutting area and tail void thickness distribution depend on the cutter face rotation directionand its speed; 2) tail void distribution can be calculated by using deviation from cutter face center to segment center.

収録刊行物

詳細情報 詳細情報について

  • CRID
    1390001205231108608
  • NII論文ID
    130004387536
  • DOI
    10.11532/journalte2004.16.101
  • ISSN
    18849105
    13495399
  • データソース種別
    • JaLC
    • CiNii Articles
  • 抄録ライセンスフラグ
    使用不可

問題の指摘

ページトップへ