Ultrasonic Treatment of Acid-Washed Diamond Powder Surface

DOI Web Site Web Site 2 Citations 31 References
  • VISBAL Heidy
    School of Mechanical Engineering, Nagaoka Gijutsu-Kagaku Daigaku (Nagaoka University of Technology)
  • ISHIZAKI Chanel
    Nano TEM Co., Ltd.,
  • ISHIZAKI Kozo
    School of Mechanical Engineering, Nagaoka Gijutsu-Kagaku Daigaku (Nagaoka University of Technology)

Bibliographic Information

Other Title
  • 酸洗浄したダイヤモンド粉末表面の超音波処理

Search this article

Description

Surface groups were evaluated to clarify the effects of sonochemical reactions on acid-washed diamond powder (5–12 μm) treated with high power ultrasound (18 W·cm−2) at 28 kHz in water under three different gas bubbling conditions; argon, oxygen and no bubbling gas. The raw and modified powder surfaces were analyzed by diffused reflectance infrared Fourier transform (DRIFT) spectroscopy and X-ray photoelectron spectroscopy (XPS) techniques. The results show that ultrasound can modify the surface of acid-washed diamond. Active oxygen species, were formed during the sonochemical treatment, reacted with the diamond surface. DRIFT results show that ether (C–O–C), carbonyl (C=O) and small amounts of peroxy (C–O–O–C) functional groups were formed on the diamond surface after the ultrasonic treatment. XPS analysis confirmed that oxygen is bonded to the diamond surface carbon after the ultrasonic treatment. There is good agreement between DRIFT and XPS results, showing that using argon as bubbling gas produces the highest relative surface oxygen content on the acid-washed diamond surface. Argon gas as monoatomic gas has higher effects in diamond surface modification by ultrasonic treatment than oxygen even for oxidation reaction, due to higher γ (the ratio of the isobaric to isochoric heat capacities) for monoatomic gases and low thermal conductivity.

Journal

Citations (2)*help

See more

References(31)*help

See more

Keywords

Details 詳細情報について

Report a problem

Back to top