Ring Compression Strength of Ceramic Filters.

DOI Web Site Web Site 1 Citations 11 References
  • ITOH Yoshiyasu
    Power & Industrial Systems Research & Development Center, Toshiba Corp.
  • IKEDA Makoto
    Power & Industrial Systems Research & Development Center, Toshiba Corp.
  • SUYAMA Shoko
    Power & Industrial Systems Research & Development Center, Toshiba Corp.
  • IKEDA Isao
    Yokohama Operations-Materials & Components, Toshiba Corp.

Bibliographic Information

Other Title
  • セラミックフィルターの圧環強度
  • セラミックフィルター ノ アツカン キョウド

Search this article

Abstract

Stress concentration behavior of the O-ring and C-ring test specimens compressed by diametrically opposite external concentrated loads has been analyzed using a finite element method. The ring compression strength for three kinds of tubular ceramic filter was evaluated using the O-ring and C-ring test specimens. It was indicated in this experiments that the fracture strength of both internal and external surfaces of tubular ceramic filters could be evaluated using the O-ring and C-ring tests, respectively. The experimental results showed that the O-ring compression strength and rigidity of silicon carbide-based filters were longer than that of alumina filters, silica- and magnesia-based filters were longer than alumina- and silica-based filters. It was also confirmed that a large difference in fracture strength of the internal and external surfaces can be observed in the case of silicon carbide-based filters.

Journal

Citations (1)*help

See more

References(11)*help

See more

Keywords

Details 詳細情報について

Report a problem

Back to top