A Numerical Study on the Optimum Fuel Split-Injection Scheme Configuration in a Constant-Volume Chamber

DOI Web Site 参考文献6件
  • AKHYARSI Odi
    Graduate School of Engineering, Toyohashi University of Technology
  • NADA Yuzuru
    Department of Mechanical Engineering, Toyohashi University of Technology
  • NODA Susumu
    Department of Mechanical Engineering, Toyohashi University of Technology

説明

The effects of diesel fuel split-injection on the fuel-air ratio and the gas velocity distribution inside the combustion chamber are numerically investigated using a modified KIVA-3V code that incorporates an Enhanced Taylor Analogy Breakup (ETAB) model into the calculation of spray droplet breakup. The second injection in the split-injection scheme can generate a sudden increase in the flammable mixture area inside the chamber. Among the schemes evaluated, the split-injection configuration in which 75% of the fuel mass is injected during the first injection and the remaining fuel mass is injected after a 1.0-ms dwell is preferred as the optimum configuration with respect to particulate emission reduction. The configuration tends to produce the widest flammable area inside the chamber during the mixing-controlled combustion phase. The dwell duration in split-injection schemes does not have a linear correlation with the area of the flammable mixture. The gas velocity distributions do not change significantly when the fuel injection mass ratio and dwell duration are varied.

収録刊行物

参考文献 (6)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ