血液ポンプ流れの数値解析

DOI

書誌事項

タイトル別名
  • Numerical analysis of blood flow within blood pumps

抄録

We introduce examples of computational fluid dynamics (CFD) analysis of blood flow in continuous flow blood pumps as shown below. In all analyses, blood was assumed to be an incompressible Newtonian fluid, and Reynolds-average Navier-Stokes equations were calculated. Turbulence model which is suitable for wide range of Reynolds number was chosen.<br>VALVO Pump<br>An estimation method of hemolysis within blood pumps by CFD analysis was proposed.By applying this method, the design modification of the pump was carried out in order to improve the hemolytic performance.<br>VALVO Pump 2<br>Numerical analysis of the blood flow in the axial flow pump was conducted and the pump hydraulic performance and the hydrodynamic forces acting on the impeller were calculated to determine the parameters for the passive magnetic bearing.<br>Catheter-type VAD<br>Blood flow in the left ventricle under support with a catheter-type continuous flow blood pump was investigated numerically and experimentally. Assessment based on average wall shear stress on the left ventricular wall indicated that some of the combinations of the catheter tip shape and insertion depth improved the washout effect.

収録刊行物

  • 生体医工学

    生体医工学 53 (Supplement), S134_02-S134_02, 2015

    公益社団法人 日本生体医工学会

詳細情報 詳細情報について

  • CRID
    1390001205266834816
  • NII論文ID
    130005163830
  • DOI
    10.11239/jsmbe.53.s134_02
  • ISSN
    18814379
    1347443X
  • 本文言語コード
    ja
  • データソース種別
    • JaLC
    • CiNii Articles
  • 抄録ライセンスフラグ
    使用不可

問題の指摘

ページトップへ