書誌事項
- タイトル別名
-
- Fabrication of Carbon Fiber-Reinforced hBN Composites
- タンソ センイ キョウカ hBNケイ フクゴウザイ ノ サクセイ
この論文をさがす
抄録
Unidirectional carbon fiber-reinforced hBN composites were fabricated by a filament winding technique, followed by hot-pressing at 1900°C, 30MPa for 1h in N2 atmosphere. An hBN powder containing 8 wt% oxygen and a high-purity hBN powder admixed with 30 wt% Al2O3 were used as starting powders. The bending strength of hBN composites and monolithic hBN was evaluated by three-point bending test. The strength of hBN composites was twenty-five times and six times larger than that of monolithic hBN (B2O3) and hBN (Al2O3), respectively. The hBN composites exhibited typical fracture behavior of fiber-reinforced composites.
収録刊行物
-
- Journal of the Ceramic Society of Japan (日本セラミックス協会学術論文誌)
-
Journal of the Ceramic Society of Japan (日本セラミックス協会学術論文誌) 102 (1181), 58-62, 1994
公益社団法人 日本セラミックス協会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001205278254848
-
- NII論文ID
- 110002290453
- 10010465918
-
- NII書誌ID
- AN10040326
-
- ISSN
- 18821022
- 09145400
- http://id.crossref.org/issn/09145400
-
- NDL書誌ID
- 3865856
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可
